DHR10 Powered Loudspeaker Features: Featuring a plywood cabinet that delivers a clear sound with minimal vibration Plywood enclosure with a polyurea coating for a robust, scratch resistant surface Compact appearance thanks to a 10-inch LF driver that provides excellent low frequency response Can be installed in a horizontal or vertical configuration with a rotatable HF horn offering the flexibility needed for installation in a wide range of environments Optional UB-DXRDHR10 U-bracket allows both for vertical or horizontal use A pole socket for use on a stand Rigging points for use with eye bolts Propitiatory FIR-X™ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion Specifications: System Type 2-way, Bi-amped Powered Speaker, Bass-reflex Components LF Diameter: 10" cone, Voice Coil: 2", Magnet: Ferrite HF Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite Frequency Range (-10 dB) 52 Hz - 20 kHz Crossover 1.9 kHz: FIR-X tuning™ (linear phase FIR filter) Coverage Angle (Horizontal x Vertical) H90° x V60° (Rotatable) Amplifier Type Class-D Power Rating Dynamic 700 W (LF: 500 W, HF: 200 W) *1 Continuous 325 W (LF: 260 W, HF: 65 W) Maximum Output Level (Measured peak, IEC noise @1 m) 128 dB SPL Cooling Fan cooling, 4 speeds A/D D/A Converters 24 bit 48 kHz Sampling Processors HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF I/O Connectors INPUT1: Combo x 1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) Power Consumption 60 W (1/8power), 18 W (Idle) Power Requirements 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz Cabinet Material Plywood Finish Durable Polyurea Painting, Black Handle Top x 1 Pole Socket Ø35 mm x 1 (Bottom) Rigging Top x 2, Rear x 1 (Fit for M10 x 30 - 50 mm Eyebolts) Floor Monitor Angle - Dimensions (W x H x D) (with rubber feet) 305 mm x 494 mm x 300 mm (12.0" x 19.5" x 11.8") Net Weight 15.0 kg (33.1 lbs)