Machine types |
7D2W - 1 year warranty
7D2V - 3 year warranty |
Form factor |
2U rack. |
Processor |
One or two AMD EPYC 7002 Series processors (formerly codenamed "Rome") or AMD EPYC 7003 Series processors (formerly codenamed "Milan"). Supports processors up to 64 cores, core speeds of up to 4.1 GHz, and TDP ratings of up to 280W. |
Chipset |
Not applicable (platform controller hub functions are integrated into the processor) |
Memory |
32 DIMM slots with two processors (16 DIMM slots per processor). Each processor has 8 memory channels, with 2 DIMMs per channel (DPC). Lenovo TruDDR4 RDIMMs and 3DS RDIMMs are supported:
- Performance+ RDIMMs: 1 DPC at 3200 MHz, 2 DPC at 3200 MHz
- RDIMMs: 1 DPC at 3200 MHz, 2 DPC at 2933 MHz
- 3DS RDIMMs: 1 DPC at 2933 MHz, 2 DPC at 2666 MHz
|
Memory maximum |
Up to 8TB with 32x 256GB 3DS RDIMMs |
Persistent memory |
Not supported. |
Memory protection |
ECC, SDDC, Patrol/Demand Scrubbing, DRAM Address Command Parity with Replay, DRAM Uncorrected ECC Error Retry, Post Package Repair |
Disk drive bays |
Up to 20x 3.5-inch or 40x 2.5-inch hot-swap drive bays:
- Front bays can be 3.5-inch (8 or 12 bays) or 2.5-inch (8, 16 or 24 bays)
- Middle bays can be 3.5-inch (4 bays) or 2.5-inch (8 bays)
- Rear bays can be 3.5-inch (2 or 4 bays) or 2.5-inch (4 or 8 bays)
- Combinations of SAS/SATA, NVMe, or AnyBay (supporting SAS, SATA or NVMe) are available
The server also supports these drives for OS boot or drive storage:
- Two 7mm drives at the rear of the server (in addition to any 2.5-inch or 3.5-inch drive bays)
- Internal M.2 module supporting up to two M.2 drives
|
Maximum internal storage |
- 2.5-inch drives:
- 614.4TB using 40x 15.36TB 2.5-inch SAS/SATA SSDs
- 491.52TB using 32x 15.36TB 2.5-inch NVMe SSDs
- 96TB using 40x 2.4TB 2.5-inch HDDs
- 3.5-inch drives:
- 360TB using 20x 18TB 3.5-inch HDDs
- 153.6TB using 20x 7.68TB 3.5-inch SAS/SATA SSDs
- 76.8TB using 12x 6.4TB 3.5-inch NVMe SSDs
|
Storage controller |
- Onboard NVMe and NVMe Switch Adapters (no RAID)
- Onboard SATA (no RAID)
- 12 Gb SAS/SATA RAID adapters:
- RAID 530i-8i (cacheless) supports RAID 0, 1, 10, 5, 50
- RAID 530i-16i (cacheless) supports RAID 0, 1, 10
- RAID 930-8i with 2GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60
- RAID 930-16i with 4GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60
- RAID 940-8i with 4GB or 8GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60
- RAID 940-16i with 8GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60
- RAID 940-32i with 8GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60
- 12 Gb SAS/SATA non-RAID: 430-8i, 430-16i and 440-16i HBAs
|
Optical drive bays |
No internal optical drive. |
Tape drive bays |
No internal backup drive. |
Network interfaces |
Dedicated OCP 3.0 SFF slot with PCIe 4.0 x16 host interface. Supports a variety of 2-port and 4-port adapters with 1GbE, 10GbE and 25GbE network connectivity. One port can optionally be shared with the XClarity Controller (XCC) management processor for Wake-on-LAN and NC-SI support. |
PCI Expansion slots |
Up to 8x PCIe 4.0 slots, all full height slots and with rear access, plus a slot dedicated to the OCP adapter. Slot availability is based on riser selection and rear drive bay selection. Slots 4-8 require two processors.
Slots are configured using three riser cards. Riser 1 (slots 1-3) and Riser 2 (slots 4-6) are installed in slots in the system board, Riser 3 (slots 7-8) is cabled to ports on the system board.
A variety of riser cards are available.
For 2.5-inch front drive configurations, the server supports the installation of a RAID adapter or HBA in a dedicated area that does not consume any of the PCIe slots.
|
Ports |
Front: 1x USB 3.1 G1 (5 Gb/s) port, 1x USB 2.0 port (also for XCC local management), External diagnostics port, optional VGA port.
Rear: 3x USB 3.1 G1 (5 Gb/s) ports, 1x VGA video port, 1x RJ-45 1GbE systems management port for XCC remote management. Optional DB-9 COM serial port (installs in slot 3).
Internal: 1x USB 3.1 G1 connector for operating system or license key purposes
|
Cooling |
Up to 6x N+1 redundant hot swap 60 mm fans, configuration dependent. One fan integrated in each power supply. |
Power supply |
Up to two hot-swap redundant AC power supplies, 80 PLUS Platinum or 80 PLUS Titanium certification. 500 W, 750 W, 1100 W and 1800 W AC options, supporting 220 V AC. 500 W, 750 W and 1100 W options also support 110V input supply. In China only, all power supply options support 240 V DC. Also available is a 1100W power supply with a -48V DC input. |
Video |
G200 graphics with 16 MB memory with 2D hardware accelerator, integrated into the XClarity Controller. Maximum resolution is 1920x1200 32bpp at 60Hz. |
Hot-swap parts |
Drives, power supplies, and fans. |
Systems management |
Operator panel with status LEDs. Optional External Diagnostics Handset with LCD display. Models with 8x or 16x 2.5-inch front drive bays can optionally support an Integrated Diagnostics Panel. XClarity Controller (XCC) embedded management, XClarity Administrator centralized infrastructure delivery, XClarity Integrator plugins, and XClarity Energy Manager centralized server power management. Optional XClarity Controller Advanced and Enterprise to enable remote control functions. |
Security features |
Chassis intrusion switch, Power-on password, administrator's password, Trusted Platform Module (TPM), supporting TPM 2.0. Servers with EPYC 7002 processors also support TPM 1.2. In China only, optional Nationz TPM 2.0. Optional lockable front security bezel. |
Operating systems supported |
Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi. |
Limited warranty |
Three-year or one-year (model dependent) customer-replaceable unit and onsite limited warranty with 9x5 next business day (NBD). |
Service and support |
Optional service upgrades are available through Lenovo Services: 4-hour or 2-hour response time, 6-hour fix time, 1-year or 2-year warranty extension, software support for Lenovo hardware and some third-party applications. |
Dimensions |
Width: 445 mm (17.5 in.), height: 87 mm (3.4 in.), depth: 764 mm (30.1 in.). |
Weight |
Maximum: 38.8 kg (85.5 lb) |