USB Type-C™ Converter for 1 x M.2 NVMe SSD + 1 x SATA SSD / HDD with Clone Function 64190 This converter by Delock enables the simultaneous operation of an M.2 NVMe SSD, in 2280, 2260 and 2242 format, and a 2.5″ or 3.5″ SATA HDD or SSD through the USB-C™ interface. Specifications: General Connectors: 1 x USB 10 Gbps USB Type-C™ female 1 x M.2 key M slot 1 x SATA 6 Gb/s 22 pin receptacle 1 x DC jack Chipset: JMicron JMS581D Supports M.2 modules in format 2280, 2260 and 2242 with key M or key B+M based on PCIe (NVMe) Maximum height of the components on the module: 1.5 mm, application of double-sided assembled modules supported For 2.5″ and 3.5″ SATA HDD / SSD Supports NVM Express (NVMe) Supports S.M.A.R.T. Supports TRIM Supports Native Command Queuing (NCQ) Data transfer rate up to 10 Gbps Supports UASP 7 x LED indicator for power, access and copy status Bootable Function key: 1 x Clone button 1 x On / Off switch 1 x switch for clone mode Dimensions (LxWxH): ca. 102 x 67 x 14 mm Hot Plug, Plug & Play Power supply specification Wall power supply Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.6 A Output: 12 V / 2 A Ground outside, plus inside Dimensions: inside: ø ca. 2.5 mm outside: ø ca. 5.5 mm length: ca. 10 mm System requirements Android 11.0 or above Chrome OS Linux Kernel 5.11 or above Mac OS 11.2.3 or above Windows 8.1/8.1-64/10/10-64/11 iPad Air (4th Generation) or above iPad Pro (3rd Generation) or above Surface Pro 7 PC or laptop with a free USB Type-A port or Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 port Package content USB Type-C™ converter Cable USB-C™ male to USB-C™ male (with adapter to USB Type-A male), length ca. 30 cm 1 x thermal conductive pad 1 x thermal conductive plate External power supply 12.0 V / 2.0 A User manual Package Retail Box