Ole hyvä ja odota...
Tuote on lisätty ostoskoriin. Näytä ostoskorin sisältö
Ostoskorisi on tyhjä

CISCO UPG CISCO 7600 ROUTE SWITCH

Etusivu Verkko Tarvikkeet CISCO UPG CISCO 7600 ROUTE SWITCH
Tuotetta ei enää löydy tietokannastamme. Jos tarvitset apua korvaavan tuotteen löytämiseen, ota meihin yhteyttä.
CISCO UPG CISCO 7600 ROUTE SWITCH (RSP720-3CXL-10GE=)

CISCO UPG CISCO 7600 ROUTE SWITCH

Tuotekoodi:
RSP720-3CXL-10GE=
EAN:
0882658169984
  • Tuote Monimediamuunnin
Kuvaus

Cisco 7600 Series RSP720-10GE with PFC-3CXL


RSP720-3CXL-10GE(=)

Cisco 7600 Series RSP720-10GE with PFC-3CXL includes:

  • Two X2-based 10 GE ports
  • Two GE SFP ports and one 10/100/1000 gigabit port for additional flexibility
  • Integrated 720-Gbps switch fabric
  • PFC-3CXL (high capacity) and Multilayer Switch Feature Card (MSFC4)
  • Route processor: 1- to 4-GB DRAM (2-GB default)
  • Service processor: 1- to 2-GB DRAM (1-GB default)
  • One external Compact Flash Type II slot
  • 4-MB NVRAM
  • 512-MB internal boot memory (Compact Flash)

The Cisco® 7600 Series Route Switch Processor 720 with 10 Gigabit Ethernet uplinks (RSP720-10GE) is designed to deliver the high scalability, performance, and fast convergence required for today and tomorrow's demanding voice, video, data, and mobility (quadruple-play) services. The Cisco 7600 Series RSP720-10GE offers Carrier Ethernet service providers tremendous flexibility, scalability, and performance at the access or aggregation edge while deploying advanced IP video and triple-play (voice, video, and data) system applications in both the residential and business services markets. In essence, it gives service providers and enterprises true service convergence with the ability to manage a wide variety of applications over a range of access media using a single platform, the Cisco 7600 Series Routers.

The Cisco 7600 Series RSP720-10GE includes the following:

  • Two X2-based 10 Gigabit Ethernet ports (with line rate forwarding)
  • Two Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports and one 10/100/1000 gigabit port for additional flexibility: This port-level flexibility allows you to position the Cisco 7600 Series at the access edge connecting with a 10 Gigabit Ethernet port uplink and a Gigabit Ethernet port uplink. The two 10 Gigabit Ethernet uplink ports help save a slot that you can use for an additional high-density Ethernet module, shared port adapter (SPA), or SPA interface processor (SIP).
  • Crossbar switch fabric: The Cisco 7600 Series RSP720-10GE has a new and enhanced 720-Gbps crossbar switch fabric and the same new application-specific integrated circuit (ASIC)-based forwarding engine that is used by the Cisco RSP720. This single module delivers 40 Gbps of switching fabric capacity per slot, supporting 4-port 10 Gigabit Ethernet and 48-port 10/100/1000 density line cards.
  • Standby as an independent forwarding line card: In a redundant configuration, the Cisco 7600 Series RSP720-10GE introduces the unique capability of the standby processor being able to operate as an independent distributed forwarding line card.

With hardware-enabled forwarding for IPv4, IPv6 Unicast and Multicast, and Multiprotocol Label Switching (MPLS), the Cisco 7600 Series RSP720-10GE can provide high-speed central forwarding with rich packet-processing features such as access control lists (ACLs), quality of service (QoS), MPLS VPNs, and more. The Cisco 7600 Series RSP720-10GE delivers a rich set of IP features in hardware for applications such as subscriber aggregation, IP Forwarding, Layer 2 and Layer 3 MPLS VPNs, and Ethernet over MPLS (EoMPLS) with QoS and security features.

The Cisco 7600 Series RSP720-10GE comes integrated with two new daughter cards:

  • Cisco 7600 Policy Feature Card (PFC-3C or PFC-3CXL): Performs Layer 2 and Layer 3 forwarding in hardware with consistent performance, even with intensive features enabled such as ACLs, QoS, generic routing encapsulation (GRE), or Network Address Translation (NAT). The card executes the following functions:
    • Performs Layer 2 and Layer 3 forwarding
    • Enforces ACL functions
    • Performs QoS policing and marking
    • Collects NetFlow statistics
    • Offers Control Plane Policing (CoPP)
  • Cisco 7600 Multilayer Switch Feature Card (MSFC4): Runs Layer 2 and Layer 3 protocols and performs all the control-plane functions.

Features

Feature

Benefits

Integrated 720-Gbps switch fabric

• Offers Layer 2 forwarding rates of up to 30 million packets per second (Mpps) (Centralized Forwarding)
• Provides bandwidth capacity of 40 Gbps per slot
• Allows additional slots for increased port density

Hardware-based Cisco Express Forwarding

• Offers Layer 3 (IP and MPLS) forwarding rates of 30 Mpps (Centralized Forwarding)

10 Gigabit Ethernet and Gigabit Ethernet port options

• Offers two 10 Gigabit Ethernet and three Gigabit Ethernet port options (including one 10/100/1000 RJ-45 port) on the RSP

Faster CPU and added memory

• Performance improvements, including:
• Faster protocol convergence times
• Improved Internet Group Management Protocol (IGMP) snooping times
• Improved router bootup times
• Faster rates of establishing Dynamic
Host Configuration Protocol (DHCP) server and
Label Distribution Protocol (LDP)
• IP sessions and Traffic Engineering

High-density residential subscribers aggregation

• Allows customers to support a combination of Layer 2 VPN (L2VPN) and L3VPN features for use in a quadruple-play network


Hardware Features of Cisco 7600 Series RSP720-10GE

Features

RSP720-3C-10GE

RSP720-3CXL-10GE

Memory (route processor/switch processor)

Up to 4 GB/Up to 2 GB

Up to 4 GB/Up to 2 GB

Compact Flash memory

512 MB/1 GB

512 MB/1 GB

Nonvolatile RAM (NVRAM)

4 MB

4 MB

File Allocation Table (FAT) 32 file system

Supported

Supported

Scalability for Cisco 7600 Series RSP720-10GE

Part Number

RSP720-3C-10GE

RSP720-3CXL-10GE

IPv4 Routing

In hardware: Up to 400 Mpps*

In hardware: Up to 400 Mpps*

IPv6 Routing

In hardware: Up to 200 Mpps*

In hardware: Up to 200 Mpps*

Layer 2 bridging

In hardware: Up to 400 Mpps*

In hardware: Up to 400 Mpps*

MPLS

• MPLS in hardware to enable use of Layer 3 VPNs and EoMPLS tunneling
• Up to 1024 Virtual Route Forwarding (VRF) with a total of up to 256,000 routes per system
• MPLS in hardware to enable use of Layer 3 VPNs and EoMPLS tunneling
• Up to 1024 VRF with a total of up to 1,000,000 routes per system

Generic routing encapsulation (GRE)

In hardware

In hardware

NAT

Hardware assisted

Hardware assisted

Routes

256,000 (IPv4); 128,000 (IPv6)

1M (IPv4); 512K (IPv6)

NetFlow entries

128,000

256,000



QoS Features of Cisco 7600 Series RSP720-10GE

Feature

RSP720-3C-10GE

RSP720-3CXL-10GE

Aggregate rate-limiting location

Ingress port or VLAN and egress VLAN or Layer 3 port

Ingress port or VLAN and egress VLAN or Layer 3 port

Rate-limiting level types:

Committed information rate (CIR) and peak information rate (PIR)

CIR and PIR

CIR and PIR

Flow-based rate-limiting method; number of rates

Per source address, destination address, or full flow; 64 rates

Per source address, destination address, or full flow; 64 rates

MAC ACLs featuring per-port and per-VLAN granularity

Yes

Yes



Security Features of Cisco 7600 Series RSP720-10GE

Feature

RSP720-3C-10GE

RSP720-3CXL-10GE

Port security

Yes

Yes

IEEE 802.1x and 802.1x extensions

Yes

Yes

VLAN and router ACLs and port ACLs

Yes

Yes

Reflexive ACLs

128,000

256,000

Unicast Reverse Path Forwarding (uRPF) check in hardware

Up to 6 paths

Up to 6 paths

CPU rate limiters (denial-of-service [DoS] protection)

10 special-case rate limiters plus CoPP

10 special-case rate limiters plus CoPP

Private VLANs

Yes

Yes

MAC ACLs on IP

Yes

Yes

TCP intercept hardware acceleration

Yes

Yes



MPLS Features

Feature

RSP720-3C-10GE

RSP720-3CXL-10GE

Interface support

LAN and WAN interface modules as applicable

LAN and WAN interface modules as applicable

Label imposition and disposition (MPLS provider edge) and swapping (MPLS provider core)

Yes

Yes

Label Distribution Protocol (LDP)

Yes

Yes

Tag Distribution Protocol (TDP) support

Yes

Yes

MPLS VPN

Yes

Yes

VRF Lite

Yes

Yes

QoS mechanisms using experimental (EXP) bits

Yes

Yes

MPLS with Resource Reservation Protocol Traffic Engineering (MPLS-RSVP-TE)

Yes

Yes

MPLS Differentiated Services (DiffServ)-Aware Traffic Engineering (MPLS-DS-TE)

Yes

Yes

MPLS traceroute

Yes; refer to release notes for details

Yes; refer to release notes for details

EoMPLS

Yes

Yes



Specifications

Description

Specification

Physical specifications

(H x W x D): 1.57 x 15.35 x 17.05 in. (4 x 39 x 43.3 cm)

Weight: 11.7 lb (5.336 kg)

Power consumption

RSP720-3CXL-10GE: 375W

RSP720-3C-10GE: 355W

Environmental conditions

Operating temperature: 32 to 104°F (0 to 40°C)

Storage temperature: -40 to 167°F (-40 to 75°C)

Relative humidity: 10 to 90%, non-condensing

Regulatory compliance

Predicted mean time between failure (MTBF)

80,000 hr

Compliance

CE Markings

• Safety
• UL 60950
• EN 60950
• CSA-C22.2 No. 60950
• IEC 60950
• AS/NZS 3260
• IEC 60825-1,-2
• EN 60825 -1,-2
• 21CFR1040-10
• TS001
• EMC
• FCC Part 15 (CFR 47) Class A
• ICES-003 Class A
• EN 55022 Class A
• CISPR 22 Class A
• AS/NZS 3548 Class A
• VCCI Class A
• EN55024
• ETS300 386
• EN50082-1
• EN61000-6-1

Emission

• 47 CFR Part 15: 2005
• CISPR22: 2005
• EN300386: V1.3.3 : 2005
• EN55022: 1994 [+ amd 1 & 2]
• EN55022: 1998
• EN61000-3-2: 2000
• EN61000-3-3: 1995 [+ amd 1: 2001]
• ICES-003 Issue 4 : 2004
• KN 22: 2005
• VCCI: V-3/2006.04

Immunity

• CISPR24: 1997 [+ amd 1 & 2]
• EN300386: V1.3.3 : 2005
• EN50082-1: 1992
• EN50082-1: 1997
• EN55024: 1998 [+ amd 1 & 2]
• EN61000-6-1: 2001

Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.