CISCO SERVICE APPLICATION MODULE
Tuotetta ei enää löydy tietokannastamme. Jos tarvitset apua korvaavan tuotteen löytämiseen, ota meihin yhteyttä.
|
CISCO SERVICE APPLICATION MODULE
Tuotekoodi:
WS-SVC-SAMI-BB-K9
-
Tuote
Moduuli
-
Portit
0
-
Nopeus
0Mbps
|
Cisco Service and Application Module for IP
The Cisco® Service and Application Module for IP provides high-performance, scalable, distributed service processing for the Cisco 7600 Series Routers. The module enables service providers to deploy, provision, and manage value-added services at the network edge. This innovative service module delivers the most comprehensive set of edge aggregation services for fixed-line and mobile operators worldwide.
The Cisco Service and Application Module for IP is supported on the Cisco 7600 Series platforms to deliver the performance, density, and scalability required for comprehensive IP service delivery in large-scale deployments. It combines subscriber management features and functions with Tier-1-class routing to enable service providers to deliver new, competitive IP services to their subscribers.
Cisco 7600 Series Routers are the industry-leading edge devices that deliver robust, high-performance features for a range of service provider edge applications and enterprise metropolitan-area network (MAN) and WAN applications. Coupled with the broadest set of interfaces and innovative, adaptive network processing technology, the Cisco 7600 Series Routers lead the industry with integrated Ethernet and private-line aggregation capabilities. This unique combination enables operators to improve operational efficiency at the network edge while maximizing return on investment.
Highly Scalable Architecture
The Cisco Service and Application Module for IP consists of a base board and two daughter boards occupying a single slot in a Cisco 7600 Series chassis. The module supports switching fabric interface, constellation bus interface, network processor subsystems, and multiple processor subsystems for added performance and capacity. It has a fixed configuration. The daughter board has internal interfaces for one DDR2 MiniDIMM per processor and one Compact Flash. Three processor subsystems are implemented on the daughter card.
Several applications have been or will soon be migrated to the Cisco Service and Application Module for IP to increase session density, improve management capabilities, and reduce complexity of configuration. These include:
• Cisco Content Services Gateway 2: content-based billing and filtering (available now)
• Cisco Packet Data Serving Node: Code-Division Multiple Access (CDMA) packet gateway
• Cisco Home Agent: mobile IP agent
• Cisco GPRS Gateway Support Node: General Packet Radio Service (GPRS) packet gateway
• Cisco Access Service Network Gateway: WiMAX access router
• Cisco IP Transfer Point: SS7-over-TDM and IP gateway
Key Features and Benefits
• Greater performance: Compared to earlier modules, the Cisco Service and Application Module for IP offers increased performance. This is realized through parallel processing and faster CPUs.
• Integrated module: Installed inside a chassis with enhanced processing and memory capabilities, the module allows increased session density compared to traditional solutions. This is of critical importance where rack space is at a premium.
• Scalability: The flexible Cisco IOS Software-based architecture means that the module will be able to meet future requirements without requiring a system overhaul. Multiple modules can be added to the chassis to meet growing demands.
• Lower cost of ownership: Because the module is integrated in the chassis, there are fewer devices to manage, and capacity can be increased by adding new cards rather than new systems. The module will be the hardware platform for multiple Cisco Service Exchange Framework for Mobile applications, further reducing TCO compared to multiple applications on multiple hardware platforms.
Ordering Information
Product Number |
Description |
WS-SVC-SAMI-BB-K9 |
Cisco Service and Application Module for IP |
WS-SVC-SAMI-BB-K9= |
Cisco Service and Application Module for IP (spare) |
Physical Specifications
Specification |
Description |
Location |
Occupies any slot in the Cisco 7600 Series chassis |
Dimensions (H x W x D) |
1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm) |
Weight |
12.15 lb |
Environmental conditions |
Operating temperature |
32 to 104.5ºF (0 to 40ºC) |
Non-operating temperature |
-40 to 158ºF (-40 to 70ºC) |
Operating relative humidity |
10 to 90 percent (non-condensing) |
Non-operating relative humidity |
5 to 97 percent (non-condensing) |
Operating and non-operating altitude |
Sea level to 3000 meters operating, 4650 meters non-operating |
Mean Time Between Failures |
54,793 hours (1 base, 2 daughter cards) |
Power Consumption |
300W |
Liitettävyys |
---|
Yhteysteknologia | Langallinen |
Suunnittelu |
---|
Sisäinen | Kyllä |
Keskimääräinen vikaantumisaika | 54793 h |
Sähkömagneettinen yhteensopivuus | CE marking, EN 55022, 1998, class A, CISPR22, 1997, class A, AS/NZS CISPR 22 class A, CFR47, Part 15, class A, ICES 003 class A, VCCI Class A, EN61000-3-2, EN61000-3-3 |
Yhteensopivat tuotteet | Cisco 7600 |
Virranhallinta |
---|
Virrankulutus | 300 W |
Ympäristöolosuhteet |
---|
Käyttölämpötila (T-T) | 0 - 40 °C |
Varastointilämpötila | -40 - 70 °C |
Käytön suhteellinen kosteus (H-H) | 10 - 90% |
Säilytysympäristön kosteus | 5 - 97% |
Käyttökorkeus | 0 - 3000 m |
Käytön ulkopuolinen korkeus | 0 - 4650 m |
Paino ja mitat |
---|
Tuotteen leveys | 356 mm |
Tuotteen syvyys | 406 mm |
Tuotteen korkeus | 30 mm |
Paino | 5,51 kg |
Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.